Blog Post Promotion
High Volume Sampler ZWIN-HVS06 Product Introduction The sampler uses a high-quality turbine negative pressure pump as a power source. The particles in the sampled gas are retained by the filter membrane and deposited on the filter membrane, and the gas is discharged through the sampling hopper, the pressure port, and the motor barrel exhaust […]
Detalhes
Product Introduction The ambient air NMTC continuous automatic monitoring system consists of sampling manifold, pretreatment unit, analytical instrument, hydrogen generator, zero gas generator, air compressor, meteorological parameters, dynamic calibrator, electronic control unit, etc. It adopts the direct measurement method of cold trap enrichment to monitor the NMTC organics, which features low detection limit and good reproducibility. […]
Detalhes
ZWIN-NS06 environmental noise automatic monitoring system is composed of noise collection and analysis module, communication module and power module. It is a device suitable for real-time monitoring of outdoor noise.
Detalhes
（1）Digital Residual Chlorine Sensor ZWIN-LCL1006 Product introduction: The digital residual chlorine sensor is an instrument used to measure the concentration of residual gas in water samples. Residual chlorine refers to the remaining chlorine in the water, including free chlorine and combined chlorine. It is the chlorine used to kill bacteria and other micro organisms during […]
Detalhes
Digital PH Sensor-ZW-PH1006 Product introduction: The digital pH sensor is used to accurately measure the pH value of the solution, that is, the acidity and alkalinity of the solution. It is based on a glass electrode and can provide accurate pH measurement, usually with an accuracy of ±0.01pH unit. The sensor outputs a […]
Detalhes
ZWIN-AQMSF06 drone-mounted micro air quality online monitor is a highly integrated, intelligent and lightweight sensor component used to provide an economical and lightweight product for real-time and accurate monitoring of pollutants in the area by drones.
Detalhes
Product Introduction ZWIN-AQMS10-A Ambient Air Quality Automatic Monitoring Vehicle is designed and manufactured in accordance with GB3095-2012 Ambient Air Quality Standards for environmental monitoring, meeting the requirements for rapid measurement of monitoring parameters in environmental monitoring and environmental emergency situations. The monitoring vehicle integrates various particle analyzers, gas analyzers, management software, etc. on a mobile […]
Detalhes
Product Introduction ： The ZWIN-AQMS06 micro air quality monitor from Zwinsoft is an open pollution source online monitoring terminal that integrates environmental monitoring factors such as PM2.5, PM10, SO2, NO2, CO, O3, five meteorological parameters (temperature, humidity, air pressure, wind speed, wind direction), TVOC, noise, data acquisition and transmission, video surveillance management and information platform technologies. The […]
Detalhes
Front view Rear view Product description： The louver-type miniature air quality monitoring system developed by our company is small in size, beautiful in appearance, and easy to install. The whole set of monitoring integrates “five gases and two dusts” (PM2.5, PM10, SO2, NO2, O3, CO, TVOC) and meteorological monitoring units. Based on the wireless […]
Detalhes
The ZWIN-OlW1006 is a digital oil-in-water sensor that utilizes an RS485 communication interface and the Modbus RTU standard protocol. lt features an IP68 protection rating and a titanium alloy casing, making it suitable for various harsh working environments.
Detalhes
Tianjin Zwinsoft Technology Co., Ltd